How To Adjust Tool Changer Position SYNTEC 6MB

- Dec 12, 2018-

SYNTEC 6MB password is 520

S23

1.change parameter :
884—0
3420–1024
Note :parameter 3420 is 0 or 1024
0 means cant change tools manually
1024 means can change tool changers manually

2.Tool changers back Home .
Button Home ,then button CYCLE START

3.JOG mode ,button CCW make tool changers to the left

4.Button MPG ,use the hand wheel .

Carefully use hand wheel ,make tools in right position .
Then write down the coordinate

Then change the parameter below :
2803 Z
2801 X
2802 Z +20
884 A

5.Button RESET on the right .

BACK HOME
6.3420 change to 0 ,make sure other people cant change tools changers position .