HOW TO ADJUST THE CNC Router Machine DIAGONAL

- Mar 29, 2019-

When your receive the wood cnc router ,please to adjust the diagonal as following steps in first:

Step 1. First ,loose a little the 6 screws (black circle ) on both side of the gantry . But do not need to take the screws down .

afwfwqf2

Step 2. Find any point on the worktable surface, then to carve a square

dwqdqw

Step 3: Two possibilities:

1). If the square is like the draw as below:

fsefe

Please move the gantry as the direction of arrow

2). If the square is like the draw as below:

szdzsdzs

 

Please move the gantry as the direction of arrow

Note: Before move the gantry must be powered off or press the emergency button, so it’s possible to move the gantry.

We can also supply the CNC Router Machine, ATC Woodworking Engraving, Plasma Cutting Machine etc. Welcome to contact us