Standard Type Woodworking CNC Router SD-1325 with rotation axis (the vacuum table type/ the aluminum table)
Feature:
The drive is adopted high performance control motor technology to maximum the motor performance. High elect spindle, low noise, high power, fast response, dynamic ability, positioning cylinder could help the putting the plate, accurate positioning.
If the machine is shut down normally, the system will save the current position and serial number of the machine. However, if the power is cut off suddenly, the system will not be able to save the current position. The serial number is also the break-point before the time limit to continue, but the origin must be found again.
Dynamic performance and stability are enough to meet the requirements of high speed processing.
This machine suitable the wood furniture industry, wooden table legs, sofa legs, crafts industry: wooden buddha, wooden 3D state.
Details:
JINAN SUDIAO CNC ROUTER CO.,LTD HUA SHAN TOWN, LICHENG ZONE, JINAN CITY SHANDONG PROVINCE , CHINA | ||||||||||||||
Product | Description | Machine specification | Whole weight | |||||||||||
SD-1325 | CNC router | 3300mm*2300mm*1700mm | 1700KGS | |||||||||||
Parts | Original Country | Brand & Photos | ||||||||||||
Gantry Structure | China | |||||||||||||
![]() | ||||||||||||||
Lathe Structure | China | |||||||||||||
![]() | ||||||||||||||
Table Surface | China | PVC | ||||||||||||
Under the table | China | |||||||||||||
New single channel impeller pump | China | |||||||||||||
Operating System | Beijing | RichAuto (A11E)DSP | ||||||||||||
Inverter | China | DELTA | ||||||||||||
XY Structure | Taiwan | PMI | ||||||||||||
![]() | ||||||||||||||
Z Structure | Taiwan | TBI | ||||||||||||
Rack | Germany | HERION | ||||||||||||
Tool setting block and protection | China | |||||||||||||
Drive Mode | China | LEADSHINE 2206 | ||||||||||||
![]() | ||||||||||||||
Motor | China | LEADSHINE 863HSM80H-E1 | ||||||||||||
Transmission type | China | |||||||||||||
Rotation axis | China | |||||||||||||
Spindle parameters | Italy HQD | Speed | 0-24000r/min | |||||||||||
Spindle Power Motor | 4.5kw | |||||||||||||
Type of cooling | Air cooling | |||||||||||||
Bit | 1 | |||||||||||||
Low voltage ac | Germany | Siemens | ||||||||||||
Lubrication system | China | Redbird | ||||||||||||
Identify the location of the wires | China | |||||||||||||
Splicing | Use strength of screws inserted on rack and guide rail: level 12.9 is the highest level, that is, the hardest. | |||||||||||||
The performance grade of steel carbon screw is divided into more than 10 grades, such as 3.6, 4.6, 4.8, 5.6, 6.8, 8.8, 9.8, 10.9 and 12.9, among which the screw material of grade 8.8 and above is low-carbon alloy steel or medium carbon steel and is heat treated (quenched and tempered), which is generally called high-strength screw. | ||||||||||||||
The torque of each screw on the rack is the same, because if it is loose or tight, it will occur (so the workers use a torque drill with slow speed but large force to tighten it) to ensure the accuracy of the rack guide rail. | ||||||||||||||
Machine tool materials | Material: Cast Iron Thickness: bed square tube 8mm \ column and gantry contact surface 18mm (cutting) | |||||||||||||
The spare part’s test | Marble platform: the main feature is that it has a very precise datum plane, and the marble square can check the perpendicularity of the worktable. The marble square is used to check the parallelism and straightness of the worktable. | |||||||||||||
Gantry detection | ||||||||||||||
Parameter | ||||||||||||||
Command | G Code, *uoo, *mmg, *plt | |||||||||||||
Vacuum suction table | Multi-region minimum negative pressure of 8 | |||||||||||||
Data | XYZ Repeatiblity Accuracy | ±0.04mm | ||||||||||||
XYZ Positional Accuracy | ±0.03/300mm | |||||||||||||
Max. Speed | ≥32000mm/min | |||||||||||||
Max. Working Speed | ≥20000mm/min | |||||||||||||
Working Voltage | AC380V | |||||||||||||
Dia.of suction port | φ150mm | |||||||||||||
Working Area | 1300*2500*200mm | |||||||||||||
The Accessories and the Stores | Software CD | Type3, Ucancam, Artcam, Castmate, CAD and so on. | ||||||||||||
Drill box*1 10 different size drills | ||||||||||||||
Tool holder*2 | ||||||||||||||
Open-end wrench | ||||||||||||||
Certificate | ||||||||||||||
Warranty card | ||||||||||||||
Woodworking Knife 21 Different size | ||||||||||||||
Dust collector pipe lock ring | ||||||||||||||
According to the size of the cabinet, in order to be able to install the cabinet, the machine needs to adjust the angle and place. The first step: Before packing, workers will apply rust prevention oil on the metal parts of the machine, and evenly place the anti-corrosion material bag on the machine The second step is to cover the surface of the machine with pearl film and fix it with adhesive tape The third step is to cover the whole machine with plastic wrap and put on the tape to seal without gaps The fourth step is carefully place the machine on the board with a trailer The fifth step is splice the completed wooden case completely Finally transported by trailer to the port for storage. We pay attention of packing every customers machine, so when you receive our machine please check it carefully and take pictures for use | ||||||||||||||
1 | 2 | 3 | 4 | 5 | ||||||||||
|
| |||||||||||||
Two layers of steel pipe are welded, and there are two sides of wood plates. |
Certification:
Name: Richie wang
Please contact me for any question or advance.
WhatsApp: +86 15165175820