Fiber Dual Thick Laser Cutting Carbon Aluminum Stainless Steel Machine

Fiber Dual Thick Laser Cutting Carbon Aluminum Stainless Steel Machine

H series fiber laser cutting machine mainly is high speed and accuracy processing of carbon steel/stainless steel/aluminum steel and Galvanized sheet etc boards.
Chat Now

Product Details

 

Jinan Sudiao CNC Router Co., Ltd

          www.jnsd.en.alibaba.com

  FOB, Qingdao

      Quotation of fiber laser machine RT-3015H

Introduction

1. H series fiber laser cutting machine mainly is high speed and accuracy processing of carbon steel/stainless steel/aluminum steel and Galvanized sheet etc boards.

2. The machine processing is stable operation, mature technology, high cutting efficiency, small area.

3. The equipment main configures overall rigidity is good, and strength is high.

4. Base is high quality square tube welding, after the high temperature aging finishing.

The beam is welded by extruded aluminum profile, finished after modulation, with good comprehensive mechanical properties, good acceleration performance and effective prevent the structural deformation.


Mainly configures induction

1. Mainly machine

H series laser cutting machine experience the multiple times welding processed contain. The transport part such like the reducer, rail guide is adopted the famous brand, the gantry structural pressure finishing, quick remark and good accuracy ability.

H series laser cutting machine tool is a welding piece with multiple aging treatment. the transmission parts such as reducer and guide all adopt well-known brands. its gantry structure is extruded as a whole, rapid dynamic response and good stability, which represents the development direction of laser cutting machine.

Adopt gantry structure type, double motor synchronous drive beam, fast cutting speed, extremely low operating cost, excellent stability, high quality processing and extremely high adaptability.

2. Cutting head

High quality specialized laser cutting head configuration is most safety capacitor non contact tracking system, could adjusted the best focal, insure the whole board best cutting efficient, avoid material unevenness, focal length change caused by material scrapping. Because the cutting head is equipped with non-contact sensing device, it can realize stable Z axis floating function under the control of the system. The influence of plate unevenness on cutting quality is eliminated directly. The laser head is specially designed, using precision composite lens group, eliminating spherical aberration and cutting with high beam quality laser, which can be widely used in ceramic processing, medical processing and semiconductor processing industry.

Cutting head

Project

Parameter

Collimation

100mm

Focusing

125mm-150mm

Optical aperture

32mm

Nozzle specialize (single spray)

Single double: 0.8/1.0/1.5/2.0/2.5/3.0/3.5/4.0mm

Lens material

Quartz

Fiber interface

QBH

Auxiliary air pressure

Maximum support 25bar

Weight

~1.5kg

Application Field

Carbon steel/stainless steel/aluminum steel and Galvanized sheet etc boards.

The mountain bike rotary axis, Mainly aluminum table legs, Stainless steel chair,Wooden door steel hinge, Clock gears, Steel material packages, Trimming machine appliance, Guardrail, Grille,Window pattern.

By Industry

Official room door, Cabinet door, bathroom door, kitchen door, wardrobe door, window door and bathroom door.

Machine Configures

Number

Project

Quantity

Brand

1

Table structural/steel parts

1 set

Raytu

2

Laser sousure

1 set

MAX/Raycus

3

Laser tube

1 set

WSX/Ray tools

4

Water cooling

1 set

TEYU/Hanli

5

Industry personal computer

1 set

Advantech

6

Pneumatic system

1 set

Airtac/SMC

7

Guide

1 set

Twin/ Airtac

8

Rack

3 sets

J&T/ APEX

9

Reducer

3 sets

Motoreducer/Taifu

10

Control system

1 set

WeiHong

11

Servo system

3 sets

FUJI / Schneider

Machine Parameter

XY axis

Project

RT3015H


Processing area

3000×1500mm


The biggest moving speed

1.0g

X axis

The biggest moving speed

100m/min

Efficiency moving speed

1530mm

Positioning accuracy

±0.03mm

Repositioning accuracy

±0.02mm

Y axis

The biggest moving speed

100m/min

Efficiency moving speed

3050mm

Positioning accuracy

±0.03mm

Repositioning accuracy

±0.02mm

Z axis

Movement travel

100mm

Environment requirement

Number

Project

Parameter

1

Working environment temperature

-10°C-45°C

2

Relative humidity

45%85% Non colding condensation

3

Width environment

Ventilation/no large vibration

4

Electrical voltage

380V±10%

5

Electrical sensor collect

50/60HZ

2 

Incoterms

Unit Price

Payment Terms

FOB, Qingdao, China

 


T/T, 30% as deposit, 70% before delivery

Delivery

Package

Offer Validity Period

about 50 working days

In one plywood case

10 days

Control system

Adopted the professional laser cutting operation system, multiple country language display, sustainable operation.

Using AC servo drive system and AC servo motor, reliable performance, fast response and maintenance free;

Fast response follow table;

Linear / circular interpolation and slotting compensation function;

With USB and broadband interface, the communication of laser cutting machine is realized, and the file transmission is convenient;

Configure the specialized laser cutting automatic program software, in which have the man-made or automatic jacking blanking function.

It has the function of status display and current position display.It has the function of status display and current position display.

Common edge cutting and other functions.

Frog leaping function,backward and forward function.

Plate surface height tracking control.

Jacking function

Professional process display interface

Laser cutting machine consumption

Project

Name

Electrical consumption

Total power

 factor

Total Electrical consumption

Consumption

Electrical consumption

Laser 

source

4.5

12

12×60%=7.2

7.2agree/H


Water cooling equipment

1.8

Mainly machine & Other configures

5.7

Cutting auxiliary gas consumption

Cutting carbon steel (take a continue to processing 2mm carbon board as one example)

About one bottle of oxygen is consumed per hour, and each bottle of oxygen (pressure 14MPa, purity 99.5%) is about 15 yuan. The auxiliary gas  consumption per hour is 15 yuan / hour.

It is recommended that the customers use liquid canned gas , each can hold about 120kg gas , 320 yuan / can.

Take cutting 2mm carbon steel as an example, each can of liquid oxygen can be used for about 48 hours: 320 yuan / can ÷ 48 hours 6.7 yuan / hour.

Cutting stainless steel or aluminum steel (take a continuous processing 1mm board as one example)

Every hours consumed the gas about 3 cans nitrogen, each bottle of nitrogen (pressure 14MPa, purity 99.99%) is about 75 yuan. So that the each hour auxiliary gas  consumption is: 75 yuan/hour.

Advice the customer use liquid canned gas , but must need add one gas  carburator. Each liquid can could hole about the 120kg gas  when used the liquid nitrogen canned gas . 420yuan/can. Take one example of cutting the 1mm stainless steel, each can of liquid oxygen can could used about 12~16 hours: 420yuan / can ÷ 16 hours 26.7 yuan / hour.

gas  cutting additional consumption

Project

Name

Electrical consumption

Total power

 factor

Total Electrical consumption

Consumption

Electrical consumption

Air pressure equipment

11

13.5

13.5×50%=6.75

6.75agree/H

6.75×1yuan /agree=6.75yuan/H

air cooling equipment

2.5

Cost of other Consumables

Focusing glass: according with the Maintenance situation, normal dont need change

Prevent glass: according with the useful situation, normal two piece used one month. Each glass piece is 150yuan, 300 hours working time, such as consumption of each hour: (2×150)÷300=1yuan/hour.

Ceramic ring: according with the useful situation, normal cost two rings, each is 400yuan, 7200 hours working time, such as consumption of each hour: (2×400)÷7200=0.11yuan/hour.

Steel nozzle: Each is 50 yuan, in which used 300 hours working time, such as consumption of each hours: 50÷300=0.17yuan/hour. *according with the dollar rate 6.45.

Equipment processing cost (just used to accorded)

Number

Project

Cutting carbon

Cutting stainless steel

1

Electronic consumable

7.2

2

Cutting auxiliary gas consumption

15/6.7

75/26.7

3

Protect glass consumption

1

4

Ceramic ring

0.11

5

Cutting torch consumption

0.17

6

Total

23.48/15.18

83.48/35.09

*Note: these price is used the Chinese price, you could according with the realized yours location price.

Assemble training and after sales service

1. When installing the equipment, the customer must prepare the following contents:

Confirm the designated place where the equipment is in place;

Confirm the preparation of power supply, socket and air source in the workshop;

Environmental requirements of the plant:

Storage temperature range: - 10 ~ 45

Relative humidity: 45% - 85%

Six No: no flammable, explosive, volatile flux, no dust, no lampblack, no corrosion

2. Equipment requirements for personnel

Operator: have some working experience and simple computer operation experience.

Equipment maintenance personnel: be familiar with common computer systems, preferably have a certain electrical and CAD software foundation.

3. Equipment in place and installation

(1) According to the contract, our company will transport the equipment to the installation site designated by the user for free within the specified time, and send technical service engineer to install on site. In the case that the installation and commissioning spare parts of users are basically available, the technical service engineer will complete the installation and commissioning of the machine for users within 3-5 days to ensure that the installation and commissioning site environment is neat and clean and orderly.

(2) Equipment acceptance standard

The hardware shall be confirmed one by one according to the basic configuration, options and accessories;

The machine performance indexes shall be accepted according to the machine standard specifications, and other acceptance standards shall be formulated according to the negotiation between both parties.


4. Equipment adjusted and teaching

(1) Equipment adjust, our technician need noticed the customer already the relation files about adjusted equipment when start the adjusting, customer need provide the considerable parameter requirement for technician, in order to have the confirm aim when adjusted the equipment.

(2) Equipment training we will conduct a two-day business training for the customer's operators, including the protection knowledge of linear motor, equipment operation, daily maintenance, troubleshooting, etc

Drawing operation

The laser cutting system of Weihong is used to control the equipment to cut the work pieces with various patterns

Equipment operation

Starting and closing sequence of equipment and matters needing attention

Setting of various data of equipment, such as current, frequency, mode, etc

Matters needing attention during equipment operation

Safety issues in equipment operation

Equipment routine maintenance: equipment maintenance, light path maintenance

Training and location: both sides negotiate with the customer factory or our factory

5. After sales of equipment

The whole machine is guaranteed for one year free of charge (except for the protection of lenses, nozzles and other vulnerable parts), and is maintained for life.

The warranty period is calculated from the date of acceptance. During the warranty period, all faults meeting the warranty conditions will be repaired free of charge by our company.

Service after warranty period: our company can provide service after warranty period, and the charge for service after warranty period is composed of personnel cost and parts cost.

Our company will conduct regular patrol or telephone visit to understand the use of the customer's equipment.

Working Samples

-1 

Contact Information

Company Name

Jinan Sudiao CNC Router Co.,ltd

Address

JIANGJIAGOU INDUSTRIAL PARK,LICHENG DISTRICT,JINAN,SHANDONG,CHINA

 

Contact person

Richie wang

Email

sidewang@sudiao.com

Skype


Whatsapp

0086-15165175820

Tel

0086-15165175820


Hot Tags: fiber dual thick laser cutting carbon aluminum stainless steel machine, China, suppliers, manufacturers, factory, price, for sale

Inquiry

You Might Also Like